"Discover the Difference"

Kernkampweg 4-6  Zuid

H. J. De Vriesstraat 28  Noord


Zuid: +597 441373/441374      

Noord: +597 470954




Welcome to
the Computronics Website!

APC BE850M2 Battery Back UPS 850VA

Wees de eerste om dit product te waarderen

Beschikbaarheid: In voorraad

US$ 123,00

Snel Overzicht

  • Output: 450 Watts / 850 VA

  • Input: 120V

  • 6 x Battery-Powered Outlets

  • Total: 9 x NEMA 5-15R Out

  • 2 x USB Connections

  • Three Transformer-Sized Outlets

  • Recharge Time: 8 Hours

  • Audio Alarm

  • Cold Start/Hot Swappable Batteries

  • Delivers Battery-Powered AC

The Back-UPS BE850M2 Power Supply from APC is a combination of a battery backup and surge protector to offer protection and power for your connected electronic equipment. This power supply sports a total of nine power outlets, and six of these outlets provide power in the event of a power outage. It comes built with a hot-swappable battery that powers an entry-level computer up to 90 minutes or lets you safely power down a mid-range computer system connected to multiple support devices. For convenience, it comes with three transformer-sized outlets as well as two USB ports, which allow you to charge mobile devices without using USB wall adapters. There are also audio alarms and LED indicators to notify you of replacing the onboard battery or damaged wiring inside a building.

  • Battery and surge protected outlets protect your hardware and data during power outages, surges and spikes

  • Battery-protected and surge-only outlets reserve power capacity and run time for connected equipment that require UPS battery backup while providing surge only protection for less critical equipment

  • Surge-only outlets safeguard secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage

  • Safety-agency approval ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

  • Intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging

  • LED status display for quickly understanding unit and power status with visual indicators

  • Adjustable voltage sensitivity provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications

  • Audible alarms offer notification of changing utility power and UPS power conditions

  • Periodic automatic battery self-test ensures early detection of a battery that needs to be replaced

  • Early-warning fault analysis on batteries enabling timely preventive maintenance

  • Building wiring fault LED indicator informs users of potentially dangerous wiring problems in the wall circuit

  • Cold-start support provides temporary battery power when the utility power is out

  • Disconnected battery notification warns when a battery is not available to provide backup power

  • Hot-swappable batteries help ensure clean, uninterrupted power to protected equipment while batteries are being replaced

  • Easy battery replacement

  • With a transformer block spacing design, you can connect bulky transformer block plugs without covering up other outlets

APC BE850M2 Battery Back UPS 850VA

Dubbelklik op bovenstaande afbeelding om volledige foto te bekijken

Zoom Uit

Meer Views


Output Power Capacity 450 W / 850 VA
Nominal Output Voltage 120 V
Output Frequency 50/60 Hz ±1 Hz
Topology Standby
Waveform Type Stepped approximation to a sinewave
Output Connections 3 x NEMA 5-15R (Selector Surgetitle)
6 x NEMA 5-15R (Battery Backup)
Transfer time 6 ms typical (10 ms maximum)
Nominal Input Voltage 120 V
Input Frequency 50/60 Hz ±3 Hz (auto sensing)
Input Connections NEMA 5-15P
Cord Length 5' / 1.5 m
Input Voltage Range for Main Operations 92 to 139 V
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte
Recharge Time 8 hours
Battery Life 2 to 5 years
Battery Volt-Amp-Hour Capacity 84
Communications & Management
Ports 2 x USB Type-A
Control Panel LED status display with On Line
On Battery 
Replace Battery
Building Wiring Fault
Audible Alarm Alarm when on battery
Distinctive low battery alarm
Overload continuous tone alarm
Surge Protections
Surge Energy Rating 354 J
Operating Environment 32 to 104°F / 0 to 40°C
Operating Relative Humidity 0 to 95% non-condensing
Operating Elevation 0 to 10,000' / 0 to 15,240 m
Audible Noise 45 dBA from 3.3' / 1 m from surface of unit
Approvals Energy Star
Dimensions (H x W x D) 5.5 x 12.9 x 4.1" / 14.0 x 32.8 x 10.4 cm
Weight 9 lb / 4.1 kg
Packaging Info
Package Weight 11.0 lb
Box Dimensions (LxWxH) 16.3 x 7.6 x 6.9"


Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.