"Discover the Difference"



Kernkampweg 4-6  Zuid

H. J. De Vriesstraat 28  Noord

Questions?


Zuid: +597 441373/441374      

Noord: +597 470954


Sales@Computronics.sr

Service@Computronics.sr

Websales@Computronics.sr

Welcome to
the Computronics Website!

Kingston 4GB PC4-19200 2400MHz CL17 DDR4 Memory/RAM (KVR24S17S6/4)

Wees de eerste om dit product te waarderen

Beschikbaarheid: In voorraad

Zie prijs voor bevestiging van bestelling. Wat is dit?

Snel Overzicht

This document describes ValueRAM's KVR24S17S6/4 as a 512M x 64-bit (4GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:


• Power Supply: VDD = 1.2V Typical


• VDDQ = 1.2V Typical


• VPP = 2.5V Typical


• VDDSPD = 2.2V to 3.6V


• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals


• Low-power auto self refresh (LPASR)


• Data bus inversion (DBI) for data bus


• On-die VREFDQ generation and calibration


• Single-rank


• On-board I2 serial presence-detect (SPD) EEPROM


• 8 internal banks; 2 groups of 4 banks each


• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)


• Selectable BC4 or BL8 on-the-fly (OTF)


• Fly-by topology


• Terminated control command and address bus


• PCB: Height 1.18” (30.00mm)


• RoHS Compliant and Halogen-Free

Kingston 4GB PC4-19200 2400MHz CL17 DDR4 Memory/RAM (KVR24S17S6/4)

Dubbelklik op bovenstaande afbeelding om volledige foto te bekijken

Zoom Uit
Inzoomen

Meer Views

Details

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP = 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Single-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 8 internal banks; 2 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• PCB: Height 1.18” (30.00mm)

• RoHS Compliant and Halogen-Free

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.